Pre-treatment Chemicals

-
Pre-treatment Chemicals

De-sizing Agent

This is used to remove the different types of sizes (Starch, waxes etc.) from the fabric/yarn

Wetting and Penetrating Agent 

This is needed to reduce the surface tension of water and thus increase the absorbency of the water to the fabric

Sequestering Agent & Protective Colloid

This is needed to reduce the hardness of water and thus make ideal conditions for washing

Scouring Agent 

This is needed to remove the oil , fats etc from the fabric.

Silicone & Non Silicone Defoamers 

These are needed to reduce the foam created during the process of treatment of fabric

Non-Silicate Peroxide stabilizer 

This is used to stabilize the peroxide of hydrogen peroxide in the pretreatment process.

Peroxide Killer 

This is used to clear the residual peroxide from the fabric

Polyester Weight Reducing Catalyst 

This is used to reduce the weight of the polyester fabric during the caustic addition process

Anti-back Staining Agent 

This is used to prevent the staining of the pockets during the denim fabric treatment

Dyeing Chemicals

Sequestering Agent

It is used to reduce the hardness of water and thus make ideal condition for processing

Silicone & Non Silicone Defoamers 

These are used to reduce the foam created during the process

Buffering Agent 

These are used to maintain the pH of dye bath throughout the dyeing process

Polyester Dyeing Carriers 

These are used to facilitate easy absorption and penetration of dyes by the polyester fabric

Dispersing Agent & Oligomer Removing Agent

This is used to maintain the dispersion of dyes in the dyeing process and help to remove oligomers

Levelling Agent 

This is used to get even dyeing and even colour depth effect

Lubricants 

To reduce the friction between fabric to fabric and fabric to machine and to reduce the creation of creases in the fabric

Washing off Agent 

To remove the unfixed dyes from the fabric

Dye-fixing Agent 

To fix the dyes on to the fabric 

Soda Ash Substitute 

To substitute soda ash in the dyeing process of cotton.

Cationising Agent for Pigment Dyeing 

To provide required cationic charge to the fabric in the pigment dyeing process

Printing Chemicals:

Dispersing, Penetrating, Swelling, Levelling & Defoaming Agent

This is used to provide depth and even level printing effect, being added in the printing paste

Fixation Accelerators 

These are used to provide depth and fixation of dyes to the polyester printing fabric in loopager machine during the disperse printing process

Binders Acrylic, Self Thickening for Gold & Flock

These are used to bind the pigment or dyes onto the fabric

Fixers in Pigment Printing 

These are used to provide fastness to the print 

Thickeners 

These are used to provide viscosity to the printing paste to facilitate required printing effect

White Inks 

These are used to provide printing effect onto the fabric

Washing Off Agent 

This is needed to remove the unfixed dye from the printed fabric

Finishing Chemicals:

Stiffeners

This is used to provide stiff finish effect to the fabric

Softeners 

These are used to provide soft finish effect to the fabric

Silicone Emulsion

This is used to provide silky and soft finish effect to the fabric

Wax Finishing Agent 

This is used to provide waxy finish to the fabric

Anti Static Agent 

This is used to reduce the static power of the fabric

Water Repellant & Soil Resisting Agent 

This is used to provide water repellency and dust repellency to the fabric

Polyurethane Finishing Agent 

This is used to provide bouncy feel to the fabric

Crease Recovery Agent 

This is used to reduce the crease and provide wrinkle free effect to the fabric

Delustering Agent 

This is used to remove the luster from the viscose fabric

Anti-pilling & Anti-Slip Agents 

These are used to remove the hairing and pilling problems from the fabric and also provide anti-slip effect

Enzymatic Bio-polishing Agent 

This is used to remove the surface protruding fibers from the knit substrates and denim and thus improvise the surface feel

Comments

Post a Comment

Popular posts from this blog

Green factory

-
Introduction: Bangladesh export industries for apparel and textiles have completed its four decade. During this time there were different phases of challenges and prosperity. In the 1 st  decade the challenge was the technical know-how. Some of the big enterprises of that time played a leading role e.g. Reaz garments, Desh Garments, Paris Garments, etc. Of them Desh garments together with Korean company Hyundai trained many of its staffs in Korea for technical training. From those trained staffs our industry got many new entrepreneurs who later become leading industrialist of this time. At the middle of its 2 nd  phase the government took various steps in order to set up backward and forward linkages for the industry. This brought many new spinning mills, weaving mills, and most importantly knitted composite factories were grew up in the country like mushrooms. During the end of 2 nd  decade and start of the 3 rd  decade Bangladesh garment industry faced the first global challen
Read more

Hydro Extractor | Advantages of Hydro Extractor in Textile Finishing Process

-
Hydro Extractor | Advantages of Hydro Extractor in Textile Finishing Process Hydro Extractor: Hydro-Extractors are also called Centrifuges. Centrifuges are used for water extraction (dewatering, pre-drying) of textile materials. Values of approx. 15% for residual moisture content can be achieved depending on the type of textile fiber. Centrifuges with perforated drums or baskets (Ø up to approx. 2000 mm) which oscillate vertically in ball-and-socket joints suspended on three points are produced in various designs as pendulating, suspension, cage and vertical centrifuges, also with so called gliding support bearings as gliding support centrifuges or in horizontal resp. vertical arrangements as open-width, horizontal and warp-beam centrifuges, etc. Most centrifuges have electric drives for speeds of approx. 750–1200 rpm and are generally provided with automatic control over various ranges. For safety reasons, an interlocking lid is essential on a centrifuge so that the motor cannot b
Read more

What is Production Planning in Garments industry?

-
Production planning is the very important department in garments industry. Production planning is the controlling aspect of garments industry. It is involves everything & every task in the process to execution the delivery of goods within time frame. So, production planning is the controlling of production & manufacturing process determined by time frame. Planning department plan every style to execution the order within time limit. Without time frame garment cannot sustain so garment industry must follow every task by scheduling. Each order has a delivery date & production plan department follow production plan on the base of delivery date. They know when fabric & trims in-house in factory will. Basically some of fabric & trims come from Local & internationally .So, they plan both option on the base of delivery date. A buyer can judgment by shipment percentage & where the vendor current position? So production planning department must follow some of the
Read more